Produce custom cut graphics, seals, labels, heat transfers, vehicle markings, and more! Create all kinds of unique promotional stickers & decals to large sized POP.
Print & Cut CJV30 Series offers 4 different sizes to fulfill a wide range of applications.
Automatic Media Clamp Function allows continuous printing and cutting.
Continuous Crop Mark Detection and Contour Cut raises productivity.
High density, fast drying white ink widens usage of applications.
Continuous printing for long periods of time are possible with UISS.
Simple Studio and Fine Cut software included that easily make stickers. For professional users, Raster Link Pro4 SG RIP is includedas standard equipment.
Automatic Media Clamp Function
Printing All pinch rollers are down, the clamp pressures of those can be adjusted in three levels (four including OFF), depending on the thickness of the media. Automatic Switching
Cutting Pinch rollers on sides are down while those in the middle are up (or OFF) (Wider media needs all 3 down).
Continuous Crop Mark Detection and Contour Cut
Even when lamination is applied after printing, "Continuous Crop Mark Detection" enables the machine automatically to cut contour using automatic correction.
Virtually odorless and user-friendy ink that does not require any special ventilation. Fast drying ink provides the ability of printing on various types of media with high scratch resistance.
White Ink overlay Printing
Splitting printer head to front and rear, and overlaying printing of color and white enables the accurate printing for long periods of time.
Automatic Ink Switching allows for longer print runs
UISS for continuous printing is standard on JV33 machines. The JV33 can utilize two cartridges per color in 4-color mode. When the ink cartridge runs out, another cartridge begins supplying ink and helps prevent running out of ink. A maximum of 880cc ink per color can be loaded at one time. With 880cc of ink loaded at one time, a 50m (54yd) roll of media can be printed without interruption. Ink cartridges can be changed during printing.
Three variable dot sizes
By producing dots in three different sizes, smooth high resolution graphics are created without a grainy appearance. Even at high speed and in low resolution mode high quality printing is possible.
Software meets the professional demands, from RIP to Cutting is included as standard.This software anyone can easily operate, from creation to printing and cutting.
Simple Studio It is easy to print and create cutting data without the operation experience of Illustrator. Automatically create the cut lines for contour cuts of an image, create a contour line from photo data, or gradations. Easy to create stickers with high quality design.
RasterLinkpro4 It combines cutting data with printing data created by Illustrator, while Print& Cut is handled continuously. Image and cutting data can be output to RIP in the same way FineCut outputs to a plotter. 16 bit rendering achieves smooth gradations and White Over Lay Printing is enabled.
FineCut 7 Plugin cutting software for Illustrator and CS3,the tiling function makes it possible to perform divisional cutting of lengthy material. Creates cutting data for contour cutting and imaging.
Maximum print / cut width
610 mm (24.0")
1,020 mm (40.1")
1,361 mm (53.5")
1,610 mm (63.3")
540 dpi, 720 dpi, 1440 dpi
Print mode (Scan x Feed)
540 x 720dpi, 540 x 900dpi, 540 x 1,080dpi
720 x 540dpi, 720 x 720dpi, 720 x 1,080dpi, 720 x 1,440dpi
1,440 x 1,440dpi
Exclusive solvent ink: SS21 ink, ES3 ink
4-color mode: 440 cc cartridge x 2/color, 880 cc/color
6-color mode: 440 cc cartridge x 1/color, 440 cc/color
620 mm (24.4")
1,030 mm (40.5")
1,371 mm (53.9")
1,620 mm (63.7")
Less than 1.0 mm
Less than 25 kg (55 lbs.)
Inside: 2 inch, 3 inch / Outside: Less than φ180 mm (7.1")
Maximum cutting speed
30 cm: 11.8"/s (42 cm: 1 6.5"/s at the angle of 45)
Cutter, Water based ball-point pen, Oil based ball-point pen
Cutting in Y direction by cutter on the head
Media take-up device
Roll take-up device (Standard), inside/outside selectable
MRL-III , MGL-IIc2
VCCI class A, FCC class A, UL60950, CE Marking (EMC directive, low voltage directive), CB report
AC100V~240V, Less than 1,380VA
20°C~35°C, 35~65%RH (No condensation)
Dimensions (W x D x H)
1,524 x 739 x 1,424mm (60" x 29.1" x 56.0")
1,934 x 739 x 1,424mm (76.1" x 29.1" x 56.0")
2,289 x 739 x 1,424mm (90.1" x 29.1" x 56.0")
2,538 x 739 x 1,424mm (99.9" x 29.1" x 56.0")
110kg (242 lbs.)
130kg (286 lbs.)
145kg (319 lbs.)
160kg (352 lbs.)
mimaki CG CJV30 with heat transfer (02:01)
Mimaki CJV30 Series Mimaki JV33S sereisMimaki CG-SeriesPresent By Technology 2004 Co.,Ltd. www.tech.co.th E-mail : firstname.lastname@example.org
Mimaki CJV30 printer Series
Mimaki Integrated Printer/Cutter,Mimaki expands its award winn...
Printing and cutting arcade decals.
mimaki CG CJV30 with heat transfer
Mimaki CJV30 Series Mimaki JV33S sereisMimaki CG-SeriesPresent...
Purchased the cjv30-160. Its been a great printer and the customer service has been exceptional. When I had questions, I called and they were both patient and helpful in answering any issues or concerns I had. Neither the product nor company have let me down. Thanks for the satisfaction.